Ch3snas streaming xbox360 funplug 0.5 ushare

All i wanted !

Funplug 0.5 working with Ushare!

Credits to Rimblock~!

http://forum.dsmg600.info/viewtopic.php?id=2619&p=1

Install funplug 0.5
http://www.inreto.de/dns323/fun-plug/0.5/
Download the 2 files and put them in the root of your ch3snas,
reboot your nas.
Wait 3 minutes then the funplug will be installed.

Download the ushareverion of rimblock from http://dns323.thecorewithin.net/ to the root of your nas.

Open a telnet session to your ch3snas.
Once your in telnet
cd /mnt/HD_a2/
Then your in your root of your ch2snas

Unpack the downloaded ushare version.
using command
tar -xzvf ushare1.1a-fw1.5-ffp0.5-no_dlna.tgz

open the new directory
cd ushare1.1a-fw1.5-ffp0.5-no_dlna/
and run ./install.sh

the config file(/ffp/etc/ushare.conf) point's to \HD_a2\Share\Media\
If u want to change the location change the config file edit the file in notepad++ .

Reboot the nas and your media is visible on your xbox360 :)

Note that this does not work for the Playstation 3.

Ch3snas xbox360 streaming

okok i was a little to fast with my design... i thought i could hook up my xbox360 to my wlan and stream directly from the nas...
NOT,..... well not in the first place.

There is a workaround founded on this forum.
Finally-enjoy-video-streaming-xbox360

And it works like a charm :D gonna watch WMV kongfu panda!
The plugin is based on Funplug 0.4.


Install fonz's fun_plug 0.4 by downloading funplug-0.4.tar.gz from
Funplug 0.4
Unrar the files(fun_plug and fun_plug.tar) and place these in the root of your Ch2snas.

Reboot the Snas via the webconsole or 5 seconds powerdown on the device itself.
Wait untill its up again. The volume will have an fun_plug.d directory.

Till now only funplug is installed. Now Ushare!

Download
ushare-1.1a-fun-plug.tgz Its listed in the post.

Place the file in the root of the Ch3snas.

Telnet to the Ch3snas.

cd /mnt/HD_a2/

Then run the command

funpkg.sh ushare-1.1a-fun-plug.tgz (ushare-1.1a-fun-plug.tgz which u have placed in the root before)

Restart your Ch3snas.

U can edit the config file in the etc directory

Ch3snas Going to test.

There is a " known" problem of data loss in the ch3cnas.

The words are that u loose data when u connect a new disk in the device.
It ask's to format but it formats the wrong drive accoding to people.

There is some workaround but then u have to shut down the device and put in the new disk.. and thats not what u want when u have a raid1 configuration. :)

Going to test.

CH3SNAS NAS

CH3SNAS tweaks and tricks


http://knowledge.forestblue.nl/ch3snas.html

http://nas-tweaks.net/CH3SNAS:Tutorials

Tweakers topic
http://gathering.tweakers.net/forum/list_messages/1284778/0

Telnet To CH3SNAS explained on
http://wiki.dns323.info/howto:telnet
Funflugs
http://wiki.dns323.info/howto:fun_plug
http://www.inreto.de/dns323/fun-plug/